Attic Insulation

Retro-Fitting Attic Insulation

 

Vinyl Sash Offers Attic Insulation Services in Flint and Saginaw

Our “Attic Insulation Services in Flint and Saginaw” is one way to markedly enhance the effectiveness of a home’s insulation conveniently and affordable is by providing the home with a better insulating “seal.”This is the reason “retro-fitting” a home’s existing insulation is growing in popularity.

It has long been known that many otherwise well insulated homes, & buildings were poorly sealed or had become poorly sealed as they were modified and aged. And that the lack of a proper seal was a leading cause of air leakage in and out of homes, & buildings.

Approximately 40% of all air leaks are in your attic. Uninsulated exterior walls can account for around 15%. This air leakage results in wasted energy, and other moisture problems in most building & homes. But only recently has it become possible to address this problem without significant and costly renovations.

Today, Vinyl Sash Insulation professionals can identify the areas of greatest need and propose a cost-effective, GREEN friendly resolution that will help increase the air-quality and efficiency of your home. (Even small improvements to a building’s insulation can add up to big savings over time.) Contact Vinyl Sash today with any questions and “insulate now….save later!

Blown-in insulation has several benefits. The major one is that they offer completely uniform coverage especially in hard-to-reach areas. They also can be blown into areas that a do-it-yourself installer cannot reach. In addition, they can be installed in any thickness and density to achieve practically any desired R-value. R-value is the measure of an insulation material’s resistance to heat flow, the higher the R-value the greater the insulating power. In Michigan its recommended that an equivalent of at least an R49 (18.5″) thick layer to be applied.


Attic Insulation Services in Flint and Saginaw by Vinyl Sash the way to cut your utility bills and save Money$$

What are the benefits of blown-in insulation’s?

In the summer, radiant heat accounts for 93% of the heat gain in your home. Attic insulation is one of the most important things to look for to upgrade the energy-efficiency of your home. Blown-in insulation’s are made of any number of different materials including fiber glass, rock wool and cellulose. The one thing they have in common is that they are all fed into a pneumatic blowing machine and blown under high pressure through a long flexible hose into attics and walls. There are three main types of blown-in insulation’s: fiberglass, rock wool and cellulose. Fiberglass is the most popular and preferred material among homeowners and building contractors.

Owens Corning Fiberglass Insulation blown-in materials become an excellent thermal blanket, leaving no nook or cranny exposed for the cold to escape or heat to enter. They help to save energy and make a home more comfortable. Most blown-in insulation’s, including the ones we use, will maintain their R-values for the life of a home. Some other types of materials can settle over the years, therefore
losing some of their thermal efficiency

When you choose insulation for a new or an existing home, you will find a number of alternative products available.
However, when you know all the facts, you’ll find Owens Corning L77 and AttiCat Fiberglass insulation has the advantage. Here’s why….

* Fiberglass insulation conforms to the space where its applied…around wires, electrical boxes and water pipes. Fiberglass Insulation creates an even and continuous blanket of insulation which dramatically reduces drafts, energy loss and convectional airflow caused by air infiltration.

* Owens Corning Blown In L77 and AttiCat Insulation also seals your home against air infiltration better than other types of insulation’s. By providing a tighter seal and better protection against air infiltration, & overall energy efficiency.

* Owens Corning L77 & AttiCat Fiberglass Insulation is people safe.